3 in 1 feeding machine in China's industrial production in the field of development is very rapid, a feeding machine is a new kind of automation equipment, but because of its superior performance, high degree of automation, wide application range, strong capability of processing is used in more and more of the stamping industry manufacturers.
Market also implies the need for manufacturers to produce, at present, three combined a send material machine production not just large feeding machine manufacturers in the manufacture, more and more in small feeding machine manufacturers also put into production manufacturing industry, although this has brought competition, reducing the triple sent the price of feeder, but also can not be ignored that is the product of the good and the bad, to the customer brought the choose and buy problem in so many triple feeding machine manufacturers how to choose the suitable to their own devices. In addition to the need to pay attention to the purchase price but also need to focus on understanding what?
Kunshan ORLLMR tell you how to choose suited to their own devices: buy triple a feeding machine before, we must first clarify its material properties and stamping process characteristics. Properties of the material including material width, thickness and volume weight of material; stamping process including punch brand and tonnage punching accuracy requirements, the height of mould and so on, and which has a particularly important attribute that is material thickness. Because it determines the key points of selection.
Triple a feeder itself is designed for plate coiling uncoeeding and development, but the thickness of different then selection is different, and the price difference is very big. General 3.2mm thick below belongs to the plate and 4.5mm thick the following belongs to the plate and 6.0mm thick the following belong to the plate, 9.0mm thick the following are ultra thick plate, different plate corresponding to the different models, a feeding machine structure difference is great, the price will be very different.
Triple a feeding machine is punch to achieve automatic processing an indispensable auxiliary equipment, to replace the manual push way of transporting materials, not only improve the stamping production efficiency and stamping products quality, and fundamentally solve the traditional stamping production labor intensity, and high risk, punch mix feeding machine has become the stamping processing is the most effective and reliable mode of production.
Automatic stamping production line when paired with the actual, send the choice is very critical, and not just choose a, look at other people with good choose this, not the kind of new customers rely on price to selected, the subconscious feeling of high prices is the best, feeder selection must be to err on the side of caution should be selected according to actual stamping material properties, process characteristics, the later process changes in demand, do not blindly rely on price. This requires a senior salesman according to the material, thickness, process, accuracy, etc. some of the actual situation to recommend suitable models.
