May have no contact with the stamping industry customers, what is three in a feeding machine is very strange, I simply give you a brief introduction:

Triple a send feeding machine is composed of feeding machine, leveling machine, material racks, three in one, saving space, good stability and high precision. It is mainly used for auto parts, metal stamping, electronic digital, elevator parts, caster wheel component such as stamping industry, uncoiling, leveling and feeding of the coil, automatic operation. Three in one feeding machine equipped with automatic detection device, can automatically detect a variety of conditions in the operation, to reduce the rate of defective products play a very good effect, to save a lot of labor costs for enterprises. We all know that any of the devices are required to maintain, in order to extend the life, if do not know how to maintain, then the machine is easy to appear abnormal, Rui Ou Limei to customers provide the following several suggestions to illustrate how to maintenance the triple a feeding machine.

1: timer is normal.

2: removal of foreign bodies between the roller.

3: whether there is a foreign body between the gear.

4: oil pressure pressure is normal, the pressure gauge is normal, the visual pressure gauge indicates whether the pressure is normal.

5: air pressure gas supply system whether there is leakage.

6: the combination of screws and nuts between the agencies are loose.

7: feeding roller is good parallelism (feeding roller in the closure, the upper and lower two rollers are all have close).

The 8 part: whether there is damage, deformation, abnormal noise or other abnormal.

9: switch on the operation panel and display lights are abnormal condition, the man-machine interface may not have foreign body.

In addition, if there is anything unusual, welcome customers to inquire: 0512-36801918

We will be happy to serve you!