At present a lot of enterprises in the stamping industry in our country has been the use of the automatic stamping equipment, because it completely replace the artificial, the production efficiency is greatly improved, the quality of the products is also improved; there is stamping operation risk by machine instead of artificial is another big advantage of it. This is one of the reasons why companies choose it.

Many have not used three steps send the customer may not too understanding material, then we Ou Limei Rui to customers introduce:

1, the pressing arm rose to the highest at the same time supporting arm dropped to the lowest, in order to charge.

2. Press the control panel of the box to adjust the feed vane to be less than the inner diameter of the material on the control panel of the box.

3, the material safety hanging from the material bearing trolley (it should be noted at this time of the winding direction of the material, the spindle clockwise feeding) and material feeding spindle and is close to the inside of the gauge wheel, expansion bearing material blades fixed materials

4, the left and right gear wheel down, clamping material.

5, put down the pressing arm to make the press wheel compaction material outer ring.

6, to move the material rack spindle, make head position and raised the material support arm support roll, safe unstrapped belt.

7, feeding into the straightening machine

8, the straightening machine and material frame state in manual state, at the same time on the roller material easy access.

9, the pressing arm is pressed coil material, material supporting arm up support materials.

10, unlock the roll material, to move "forward" driven a roll of material and the stub bar near the feeding mouth and use leveling machine folding stub to stub bar bending, let the sprue can smoothly enter the feed roller belt.

11 and the material rack power with material "forward", "reverse" continues to advance materials, and the leveling machine folding head bend the sprue, the material into the belt feed roller.

12, the front wheel pressing strip, namely clamping material, the material supporting arm, head fold down.

13, after the return to the origin point inching button the material through the leveling roller, and then into the feeding machine; thus the machine is ready, automatic feeding.